Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on the BMW 3 Series E46 325Xi

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Starter motor

See other generations:
Video tutorial

In today's tutorial video, you will see the instructions to remove and replace the starter motor on the BMW 3 Series E46 325 Xi in simple and quick steps. First, open the hood of your car and start by removing the air filter box, loosening the clamp screw and the side screws (using a socket wrench); then remove the engine cover and locate the starter motor, which is found at the bottom.

After removing all the various components, unscrew the screws and connectors of the starter motor, replacing it with the new one!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Remove the Starter Motor on the BMW 3 Series E46
How to Remove the Starter Motor on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video tutorial, you will learn how to remove and replace the starter motor on the BMW 3 Series E46, following the instructions below. First, …
Replacing the Starter Motor on BMW 3 Series
Replacing the Starter Motor on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Let's replace the starter motor on a BMW 3 Series. Raise the hood and secure it. Remove the starter motor covers, disconnect the battery terminals an…
Removing the Starter Motor on the BMW 3 Series E46 320D
BMW Serie 3 (1998-2006 / E46) Today, you will learn how to remove the starter motor on the BMW 3 Series E46 320D by following the instructions below. First, open the hood and remo…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos