Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 1
    4. : How to reset the TPMS warning light on the BMW 1 Series F20

BMW Serie 1 - Video tutorial

Model: BMW Serie 1 F20, F21, MK 2 - Years 2011-2019
Part: -board computer
Operation: How to reset the TPMS warning light on the BMW 1 Series F20

If you notice that the warning light relating to the pressure of your tires comes on despite everything being in order then you must perform a simple manual reset to solve the problem. First, turn on the ignition and the car radio. Press the "Menu" button and navigate within it using the right knob. Select the item "Info" and then "Pneum". At this point, confirm the new tire pressure and exit the menu to complete the reset operation. In case of errors you can easily repeat the various steps from the beginning, making sure to turn the radio off and on again.


Posted on 27 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Serie 1 2011-2019 - How do you dismantle the cluster of the BMW Serie1 F20? Read Answer
    • Serie 1 2011-2019 - What to do when the service warning light comes on on the BMW 1 series? Read Answer
    • Serie 1 2011-2019 - Where can you find the explanations of the warning lights on the BMW 1 Series? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos