Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Radiator Replacement Instructions

Model: BMW Serie 5 E60, E61 - Years 2003-2010
Part: Radiator

Clogs or coolant leaks from the radiator are generally caused by rust formation in the system, which occurs especially if only water is used in the cooling system. To prevent this issue, it is recommended to use the appropriate coolant (various types are available commercially, either concentrated or ready to use).
In any case, if you need to replace the radiator, perform the operation with the engine cold, drain the fluid, remove the electric fan, disconnect the hoses, remove the grille cover, and extract the radiator. Then proceed with the installation of the new radiator, reassemble everything, and fill the system with coolant, ensuring no air has formed.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing a New Radiator
Installing a New Radiator
BMW Serie 5 (1995-2003 / E39) This video tutorial shows how to install a new radiator on a BMW 5 Series. The video starts with a comparison between the old and new radiator. Since…
Automatic Transmission Oil Cooler Replacement
Automatic Transmission Oil Cooler Replacement
BMW Serie 5 (1995-2003 / E39) The repair described in the video refers to the replacement of the automatic transmission oil cooler: the oil temperature is very important to ensure…
Replacing the Car Radiator
Replacing the Car Radiator
BMW Serie 5 (1995-2003 / E39) A well-functioning radiator is essential to ensure that the car always runs at its best and to avoid engine troubles. Replacing it is not particularl…

Other guides you may be interested in

How to Dismantle the Heating Radiator on a Mini Cooper

Let’s see how to dismantle the heating radiator on a Mini Cooper. First, remove the plastic cover of the centre tunnel (located under the centre tunnel on the left). Unscrew the securing screws with a screwdriver, and remove the black plastic cover that hides the heating radiator. Once all the described operations are completed, move to the engine bay: remove the plastic engine cover and disconnect the two hoses (unscrew the securing clips if present) of the radiator that goes into the cabin, allowing the fluid to drain. Disconnect the radiator from the pipes inside the cabin. Work in reverse for all the assembly steps.

Watch the video!


by ScegliAuto

More videos