Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Automatic Transmission Oil Cooler Replacement

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Transmission

The repair described in the video refers to the replacement of the automatic transmission oil cooler: the oil temperature is very important to ensure proper operation of the automatic transmission actuators; regular maintenance with the replacement of the transmission oil and its filter or even flushing the system will definitely preserve the transmission itself; however, it may happen that the cooler gets damaged and needs to be replaced: after replacement, circulate the oil to avoid the formation of air bubbles in the system.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Automatic Transmission Fluid Change
Automatic Transmission Fluid Change
BMW Serie 5 (1995-2003 / E39) If you experience shifting problems with the automatic transmission, you need to flush and replace the fluid. The necessary tools are: digital thermo…
How to Replace the Transmission Fluid in a BMW 5 Series?
How to Replace the Transmission Fluid in a BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) In this tutorial, you will see how to replace the transmission fluid in a BMW 5 Series. This is a simple operation but requires good manual skills. F…
How to Replace the Automatic Transmission Oil Filter on a BMW 5 Series
How to Replace the Automatic Transmission Oil Filter on a BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Maintenance on the automatic transmission is essential and should be performed every 37,282 mi; you need to replace the filter integrated into the oi…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos