Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Check Door Handle Functionality

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Handle

When you pull the lever of the internal door handle, it opens the lock through a cable connected to the lever itself: the cable may detach from the handle or break. To check the integrity of the connection and the cable itself, you need to remove the handle and possibly the panel; in any case, inside the handle housing, there is a screw securing the outer trim that must be removed; once the screw is taken out, slide the handle forward and then pull it out away from its housing. At this point, you can see the cable connection with the handle and the cable itself.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Check Fuel Pump Operation
Check Fuel Pump Operation
BMW Serie 5 (1995-2003 / E39) If the engine fails to start, with an irregular rotation speed during this phase, it is possible that fuel is not reaching the engine properly due to…
Remove outside handle on BMW 5
Remove outside handle on BMW 5
BMW Serie 5 (2003-2010 / E60, E61) Is the door handle damaged? Let's see the disassembly of the handle inside the BMW 5 door. We open the door, identify the hole above the side of the …
How to replace the driver side door handle of the BMW 5 Series
How to replace the driver side door handle of the BMW 5 Series
BMW Serie 5 (2010-2017 / F10, F11) Today we will explain how to replace the driver side door handle on a BMW 5 Series F10 model. Before proceeding with the handle replacement, we need …

How to Remove and Install the External Wing Mirror on a Volkswagen Tiguan

Here’s how to remove and install the external wing mirror on a Volkswagen Tiguan (passenger side). After removing the door panel: disconnect the battery terminals, unscrew the fastening pins of the mirror using the appropriate socket. Once the fastening pins are removed: take out the mirror with the electric adjustment wires from the car door. To reassemble: refit the mirror with the pins, the electric adjustment wires, and the plastic panel of the door. Finally, test the correct operation of the mirror.

Watch the video!


by ScegliAuto

More videos