Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Cap and Flap on the BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Fuel cap

This guide explains the procedure to remove and replace the fuel flap and cap on the BMW 1 Series. First, open the fuel flap and begin removing the plastic trim on the sides using thin plastic levers. Next, disconnect the wire from the flap and remove the small cap from the pipe, as shown in the video. At this point, install the new plastic for the flap, ensuring it fits perfectly. Then, install the flap and finally the fuel cap, following the video tutorial to the end!

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Fuel Filler Flap on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Don't know how to remove the fuel filler flap from your BMW 1 Series? Let's see how to proceed in the video: open the fuel filler flap, unscrew the f…
How do you replace the fuel door of the BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In order to replace the fuel door of the BMW 1 Series, you need to open it by pressing on the left side. Once the fuel door is open, you need to deta…
How to Open a Stuck Fuel Flap on a BMW 1 Series
How to Open a Stuck Fuel Flap on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Here are the instructions to open a stuck fuel flap on a BMW 1 Series, as well as on the 3 Series and 5 Series. First, open the boot lid and start re…

    Frequently Asked Questions

    • Serie 1 2004-2013 - Why won't the fuel tank flap of the BMW 1 Series E81 close? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos