Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Front Headlight

Model: BMW Serie 7 MK 2, E32, MK 3, E38 - Years: 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994
Part: Headlight

See other generations:
Video tutorial

If the headlight is broken, before proceeding with disassembly, remove any glass remnants. Then, unscrew the mounting screws located at the top of the headlight, detach the trim located just below the headlight (it is a sort of frame) to access the other two mounting screws and remove the side turn signal; at this point, using a screwdriver, slide back the tab located under the lower right corner of the headlight, which secures the headlight to the trim under the turn signal: now you can remove the headlight.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

How to Clear the Lens of the Headlights
How to Clear the Lens of the Headlights
BMW Serie 7 (2001-2008 / E68, MK 4, E65, E67, E66) First, protect the surrounding bodywork of the headlight with masking tape. Take fine waterproof sandpaper. Soak it in a bowl of detergent and start …
Replacing the Front Turn Signal
Replacing the Front Turn Signal
BMW Serie 7 (1994-2001 / E38, MK 3) Replacing the front turn signal, the one next to the headlight, is simple since it does not require removing any other components; open the hood and …
Instructions for Removing Front Turn Signal
Instructions for Removing Front Turn Signal
BMW Serie 7 (1986-1994 / MK 2, E32, MK 3, E38) As with all older cars, removing the front turn signal is quick and intuitive. You don’t need to disassemble anything else besides the headlamp itsel…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos