Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the BMW 3 Series E46 service light

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Warning light – error code

If you own a BMW 3 Series e46 (year 1998-2006) and you want to manually reset the maintenance light that appears on the instrument panel every time you start it up, then just read the following steps carefully and put them into practice. First, enter the car and make sure the ignition is off. Then press and hold the small button located between the fuel gauge and the speedometer. Then switch on the instrument panel and release it as soon as the "Inspection" item appears on the display. Finally, press and hold it again until the reset is complete.

Posted on 2 March 2023 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (1998-2006 / E46) In this short guide we will see the instructions that will allow us to reset the oil change routine maintenance service light on the BMW 3 Series E46…
BMW Serie 3 (1998-2006 / E46) To reset the BMW 3 Series E46 Service warning light, press and hold the button located on the left side of the instrument panel, while this is off. T…
BMW Serie 3 (1998-2006 / E46) The reset of the Service warning light on the instrument panel of the BMW 3 Series E46 is performed by switching on the instrument panel and holding …

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the red brake light on the BMW 3 Series mean? Read answer
    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the yellow engine fault warning light on the BMW E90 mean? Read answer
    • Serie 3 2012-2019 - Where is the paint code of the BMW 3 series 320d located? Read answer

How to Replace the Grille on BMW 3 Series

In this video, learn how to replace the grille located on the front bumper of a BMW 3 Series. Prepare to remove the plastic grille frame on both sides of the bumper using a plastic trim tool. Pry between the frame and the bumper until the clips on the inside release (remove the screws from the top of the bumper for better access). Once the clips are released, remove the grille from the bumper and install a new one. Reinstall the grille into the car's bumper by pressing it until it locks in place. Check the proper installation of the parts.

Watch the video!


by ScegliAuto

More videos