Do it yourself
Frequently asked questions about cars and motorcycles

Locating the Fuse Box

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Fuse box

If any electrical component does not respond to commands or a light does not turn on, it is likely that the corresponding protective fuse has blown. The fuse is an electrical device designed to protect a circuit from overcurrents (caused, for example, by short circuits). The operation is very simple: the fuse consists of a cartridge, through which a thin conductor wire passes, carrying the nominal current of the circuit to be protected. This wire is the actual fusible element, with a specific amperage rating. When an overcurrent occurs, the filament melts, causing the circuit to open. In the case of the vehicle in question, the fuse box with the corresponding diagram is located inside the glove compartment.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2005-2013 / E91, E90, E92) In this video, we see the position of the fuses in the BMW 3 Series E90 version: we find the EOBD port inside the driver's side door, hidden by a sma…
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video we can see the location and diagram of the fuse boxes of the BMW 3 Series E92 version: the first box is located in the passenger compar…
BMW Serie 3 (1998-2006 / E46) In this video we see the location of the fuse boxes of the BMW 3 Series E46 version: we find the first box inside the passenger compartment, behind t…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the cigarette lighter fuse of the BME 3 Series 318d e90? Read answer
    • Serie 3 1998-2006 - Where is the airbag fuse located on BMW 3 Series E46? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos