Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of Fuse Boxes on BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuse box

See other generations:
Video tutorial

In this video, you will see where the fuses are located on the BMW 3 Series E90. The first high-power fuse box is located in the engine compartment, on the left side (when viewed from the front of the vehicle), right in front of the passenger. A second fuse box can be found inside the cabin, in the glove compartment.

You do not need to remove the glove compartment to access the box because it is not located behind it, but rather "inside" the glove compartment. A third fuse box is located - still on the passenger side - in the trunk, in a compartment covered by carpet that you can open with a small handle.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Replace the Hood Lock on a BMW 3 Series E90
How to Replace the Hood Lock on a BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) This guide provides instructions for removing and replacing the hood lock on a BMW 3 Series E90. To remove the lock, you need to take off the front b…
How to Replace the Fuel Filter in a BMW 3 Series?
How to Replace the Fuel Filter in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) In this tutorial, you will see how to replace the fuel filter in a BMW 3 Series E90, a very simple and quick operation. First, lift the entire right …
How to Replace the Cabin Air Filter in a BMW 3 Series E90
How to Replace the Cabin Air Filter in a BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) This video tutorial shows how to replace the cabin air filter in a BMW 3 Series E90. First, open the hood and secure it to keep it open. Using a 8mm …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos