Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter in a BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Diesel fuel filter

In this tutorial, you will see how to replace the fuel filter in a BMW 3 Series E90, a very simple and quick operation. First, lift the entire right side of the vehicle, taking all necessary safety precautions. Then, go underneath, remove the indicated bolts, and take off the plastic cover. Next, locate the filter, disconnect both hoses by loosening the clamps, and use a 13mm wrench to remove the bracket bolt. At this point, just position the replacement part and follow the reverse procedure.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the diesel filter of the BMW 3 Series 320D
How to replace the diesel filter of the BMW 3 Series 320D
BMW Serie 3 (2005-2013 / E91, E90, E92) Below we will see the information that will allow us to disassemble and replace the diesel filter of the BMW 3 Series 320D. First, we lift the vehicl…
Replacing the Fuel Filter on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How to replace the fuel filter on a BMW 3 Series? Let's see in this video how to perform the replacement. Open the car door and pull up the hood rele…
How to Change the Fuel Filter on a BMW 320d E90
BMW Serie 3 (2005-2013 / E91, E90, E92) The fuel filter on this type of vehicle is inline and is not located in the engine compartment but just under the vehicle's floor, near the right rea…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos