Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the fuel filter of the BMW 3 Series E90.

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Fuel filter

To replace the fuel filter of the BMW 3 Series, we need to work under the car floor: if we have the availability of a lifting bridge the operation will be easier, otherwise we can manage by lifting the car from the passenger side with a jack and securing it with a jack stand. Unscrew the screws that hold the panel at the level of the driver's seat. Loosen the clamps of the tubes entering and exiting the filter and the fixing bracket, place a basin underneath to collect any fuel that may leak out, remove the tubes and remove the old filter. Insert the new filter, insert the tubes, tighten the clamp and the fixing bracket, put back the panel and secure it with the screws, lower the car.

Posted on 24 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter in a BMW 3 Series?
How to Replace the Fuel Filter in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will see how to replace the fuel filter in a BMW 3 Series E90, a very simple and quick operation. First, lift the entire right …
Replacing the Fuel Filter on BMW 3 Series
Replacing the Fuel Filter on BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Replace the fuel filter on a BMW 3 Series if you have exceeded the recommended mileage. Lift the car on a column lift and locate the fuel filter as s…
How to Replace the Fuel Filter on the BMW 3 Series?
How to Replace the Fuel Filter on the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the fuel filter on the BMW 3 Series, lift the car and loosen the mounting bolts of the protection panel. After removing the protection pan…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos