Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Fuel filter

See other generations:
Video tutorial

In this video tutorial, you can see how to replace the fuel filter on a BMW 3 Series. The first step is to purchase a new fuel filter from an authorized dealer.

The filter is located roughly under the driver's front seat. Lift the car with a hydraulic jack and place safety stands.

Using a 10 mm wrench, remove the 10 mm nut, which is the only nut to remove, as the rear has two hooks that are inserted into the frame; pull away the part that supports the filter, then there is the hose coming from the fuel tank held by clamps; you need to remove these clamps and take off the hose.

To prevent a lot of gasoline from spilling out of the hose, you can use a pair of pliers to clamp the rubber hose.

Once the front clamp is removed, you can take out the fuel filter and replace it with the new one (check the fuel flow arrow).


Updated on 26 July 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Filter on BMW 3 Series
Replacing the Fuel Filter on BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Replace the fuel filter on a BMW 3 Series if you have exceeded the recommended mileage. Lift the car on a column lift and locate the fuel filter as s…
How to Replace the Fuel Filter on the BMW 3 Series?
How to Replace the Fuel Filter on the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the fuel filter on the BMW 3 Series, lift the car and loosen the mounting bolts of the protection panel. After removing the protection pan…
Replacing the Fuel Filter on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) .. How to replace the fuel filter on a BMW 3 Series? Let's see in this video how to perform the replacement... …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos