Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter on BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Diesel fuel filter

See other generations:
Video tutorial

Replace the fuel filter on a BMW 3 Series if you have exceeded the recommended mileage. Lift the car on a column lift and locate the fuel filter as shown in the video.

Use a socket wrench to unscrew the retaining bolts near the cover that conceals the filter (disconnect the wires and various hoses from the filter) where the fuel filter is located. Once the filter is removed, take it out of the vehicle (replace it with a new filter).

Install the new fuel filter (connect the hoses and wires) and tighten the screws on the cover. Lower the car to the ground after assembly.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Fuel Filter Replacement BMW E46
Fuel Filter Replacement BMW E46
BMW Serie 3 (1998-2006 / E46) Let's see how to remove the fuel filter on a BMW 3 Series. Raise the car to access the fuel filter located under the vehicle's floor. Remove the reta…
How to Replace the Fuel Filter on the BMW 3 Series?
How to Replace the Fuel Filter on the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the fuel filter on the BMW 3 Series, lift the car and loosen the mounting bolts of the protection panel. After removing the protection pan…
Replacement of the fuel filter of the BMW 3 Series E90.
Replacement of the fuel filter of the BMW 3 Series E90.
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the fuel filter of the BMW 3 Series, we need to work under the car floor: if we have the availability of a lifting bridge the operation wi…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos