Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the diesel filter of the BMW 3 Series 320D

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Diesel fuel filter

Below we will see the information that will allow us to disassemble and replace the diesel filter of the BMW 3 Series 320D. First, we lift the vehicle and start by removing the lower plastic partition, unscrewing all the fixing screws; then we disconnect the diesel filter pipes and unscrew the bracket screw to remove the filter, as shown in the video. At this point, we install the new original diesel filter, installing it in the correct direction; we reassemble and connect the filter pipes, reassembling the lower plastic partition last!

Posted on 28 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the starter motor of the BMW 3 Series 320D.
Disassembly of the starter motor of the BMW 3 Series 320D.
BMW Serie 3 (1998-2006 / E46) Today we will discover the main instructions that will allow us to disassemble and replace the starter motor of the BMW 3 Series 320D. First of all, …
Guide to Replacing the Timing Chain on a BMW 3 Series 320D
Guide to Replacing the Timing Chain on a BMW 3 Series 320D
BMW Serie 3 (2005-2013 / E91, E90, E92) In this guide, you will find the main instructions to disassemble and replace the timing chain on a BMW 3 Series 320D, engine code N43. First, open t…
How to replace the water pump of the BMW Series 3 320D
How to replace the water pump of the BMW Series 3 320D
BMW Serie 3 (2005-2013 / E91, E90, E92) In this guide, we will see the main instructions on how to disassemble and replace the water pump of the BMW Series 3 320D. First, let's open the car…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos