Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Rear Hood Gas Strut

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Body

If the rear hood does not stay up on its own when opened, it means the support strut has failed; replacing it is very simple and the replacement part is easy to find: specify the length of the strut and the type of attachment. To replace it, start by removing the retaining ring that secures the upper eyelet to the pin on the side of the hood; then remove the clip that secures the ball joint to the body edge and complete the disassembly of the old strut. Proceed in reverse for the installation of the new one by securing the lower clip and the upper retaining ring.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 5 (1988-1995 / E34) When replacing the head gasket, it is good practice to also replace the valve guide seals: use the appropriate arch clamp to compress the return spri…
BMW Serie 5 (1995-2003 / E39) Identify the faulty bulb. Remove the retaining spring from the bulb holder, the metal cover, and take it off the bulb. Remove the spring and the bulb…
BMW Serie 5 (2003-2010 / E61, E60) To replace the front shocks, you first need to have the appropriate clamps to compress the spring so you can remove the shock mount; start by lifting…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos