Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Low Beam Bulb on a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Headlight bulb

To replace the low beam bulb on a BMW 3 Series, remove the front wheel on the side of the headlight to be changed. Unscrew the 9 bolts that hold the rear wheel well to the headlight and take it off. Next, unscrew the 5 bolts that hold the rear cover of the bulb, disconnect the tabs (the left tab to the right and the right tab to the left), remove the burnt-out bulb, and disconnect the connector. After removing the burnt-out bulb, take the new bulb and position it with the connector base facing down in the headlight. Snap the tabs behind the bulb in the reverse order of disassembly, connect the connector, get in the car, turn on the ignition, and turn on the headlights to check the bulb's proper operation. Then, reinstall the cover behind the headlight by screwing in the bolts, reinstall the wheel well by screwing in the bolts, and put the wheel back on.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Low Beam Headlight Bulb on a BMW 3 Series
Replacing the Low Beam Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Here are the instructions to remove and replace the low beam headlight bulb on a BMW 3 Series. To access the low beam bulb, remove the plastic cover …
Replacement of the front headlight bulb of the BMW 3 Series
Replacement of the front headlight bulb of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Following these simple steps, we will see how to disassemble and replace the low beam or high beam bulb of the front headlight of the BMW 3 Series. F…
Replacement of the headlight bulb for the BMW Series 3.
Replacement of the headlight bulb for the BMW Series 3.
BMW Serie 3 (2005-2013 / E91, E90, E92) In this guide, we will explore the instructions on how to disassemble and replace the low beam bulb of the front headlight of the BMW Series 3. To ac…

Other guides you may be interested in

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos