Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Add Air to Tires and Reset the TPMS on a BMW X3

Model: BMW X3 MK 3, G01 - Years 2017-2024
Part: Tire pressure warning light

In this video, see how to add air to the tires of a BMW X3 and then reset the TPMS: on the driver's door jamb, you will find a sticker with the precise tire pressure for the front and rear tires. Knowing this information, go to the tires, unscrew the valve cap, and add air while checking with the pump's pressure gauge. Now that you're in the vehicle, go to iDrive and scroll right to "My Vehicle", then click on "Vehicle Status" and finally "Tire Settings", from which you will perform the reset. Now just drive for a few miles, and the warning light will turn off.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the BMW X3
How to reset the tire pressure warning light on the BMW X3
BMW X3 (2003-2010 / MK 1, E83) Today we will discover the instructions that will allow us to reset the tire pressure warning of the BMW X3; before performing the TPMS sensor reset,…
How to reset the TPMS light on the BMW X3
How to reset the TPMS light on the BMW X3
BMW X3 (2010-2017 / MK 2, F25) Let's turn on the instrument panel of the BMW X3 and proceed with the TPMS warning light reset by pressing the button on the display; keep the button…
How to reset the tire pressure indicator of the BMW X3
BMW X3 (2003-2010 / MK 1, E83) The following steps will allow us to reset the tire pressure warning of the BMW X3; before resetting the TPMS sensors, it is necessary that all four …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos