Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X3
    4. : How to disassemble the sun visor of the BMW X3.

BMW X3 - Video tutorial

Model: BMW X3 F25, MK 2 - Years 2010-2017
Operation: How to disassemble the sun visor of the BMW X3.

Let's briefly go over the instructions that will allow us to disassemble and replace the sun visor of the BMW X3, following these simple steps. First, we get into the car and start by removing the small plastic cap that we find at the end of the sun visor. Then, we detach the sun visor on one side and unhook the plastic clip on the other side, disconnecting the wiring of the light, as shown in the video. At this point, we remove and replace the sun visor with the new one, making the electrical connection of the bulb and securing it properly!


Posted on 14 February 2024 by ScegliAuto

    Frequently Asked Questions

    • X3 2010-2017 - How much coolant should be added to the BMW X3? Read Answer
    • X3 2010-2017 - Why does the BMW X3 not turn on? Read Answer
    • X3 2003-2010 - When does the 4x4 warning light on the BMW X3 come on? Read Answer
    • X3 2017-2024 - What problems with the transfer case of the BMW X3? Read Answer
    • X3 2003-2010 - What warning lights are there on the BMW dashboard? Read Answer
    • X3 2010-2017 - Where is the fuse for the ignition of the instrument cluster located in a BMW X3? Read Answer
    • X3 2003-2010 - How can I remove the BMW X3 windshield seal? Read Answer
    • X3 2003-2010 - What does the BMW X3 transfer case fuse check? Read Answer
    • X3 2003-2010 - How much does a manifold cost for BMW X3? Read Answer
    • X3 2003-2010 - Where is the inertia switch located in a BMW X3? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos