Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of BMW X3 ceiling light for bulb replacement.

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Instrument panel light

In this video we can see how to disassemble the ceiling light of the BMW X3, in order to replace the bulb inside: first we have to remove the sun visors, which are held by small screws. Then we have to remove the entire part of the internal rearview mirror: you have to enter inside the imperial corresponding to the mirror to release the two holding strips. There are also two holding strips on the sides of the ceiling light, and these must be pushed with a small screwdriver, after slightly moving the ceiling light, which is already moved by removing the holding clips on the glass. Now we can access the bulbs and change them.

Posted on 18 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear turn signal bulbs of the BMW X3
How to replace the rear turn signal bulbs of the BMW X3
BMW X3 (2003-2010 / MK 1, E83) To replace the bulbs of the rear side turn signal lights of the 2006 BMW X3, we need to open the trunk and remove the internal side of the rear hood,…
Replacing the Rear Headlight Bulbs on the BMW X3
Replacing the Rear Headlight Bulbs on the BMW X3
BMW X3 (2010-2017 / MK 2, F25) Today’s instructions will show you how to remove and replace the rear headlight bulbs on the BMW X3 in simple steps. First, open the trunk lid and st…
How to Close the Sunroof of a BMW X3 E83 in an Emergency
How to Close the Sunroof of a BMW X3 E83 in an Emergency
BMW X3 (2003-2010 / MK 1, E83) In this video, learn how to close the sunroof of a BMW X3 E83 in an emergency, such as when both windows remain partially open. There is a simple way…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos