Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear turn signal bulbs of the BMW X3

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Side marker bulb

To replace the bulbs of the rear side turn signal lights of the 2006 BMW X3, we need to open the trunk and remove the internal side of the rear hood, in order to access the headlight compartment. Remove the internal cover of the headlight and disconnect the bulb from the connector, remove the bulb and insert the new one. Repeat the same operation for the replacement of the left turn signal bulb. After replacing the bulbs, start the car to test their functionality, otherwise it may be necessary to replace the corresponding fuse. If the replacement is successful, close the side cover and the trunk.

Posted on 19 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear headlight bulbs of the BMW X3
Replacement of the rear headlight bulbs of the BMW X3
BMW X3 (2010-2017 / MK 2, F25) Today's instructions will allow us to disassemble and replace the bulbs of the rear headlight of the BMW X3. First, we open the rear hatch of the tru…
Replacing the Rear Headlight Bulbs on the BMW X3
Replacing the Rear Headlight Bulbs on the BMW X3
BMW X3 (2010-2017 / MK 2, F25) Today’s instructions will show you how to remove and replace the rear headlight bulbs on the BMW X3 in simple steps. First, open the trunk lid and st…
How to replace the rear headlight bulbs of the BMW X3
How to replace the rear headlight bulbs of the BMW X3
BMW X3 (2003-2010 / MK 1, E83) Today's guide will show us how to disassemble and replace the rear headlight bulbs of the BMW X3, in simple and quick steps. First, let's move to the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos