Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight on a BMW E91

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Tail light

You won't need any special tools for this operation, just a plastic trim tool. It is very important to follow this simple and brief guide. Open the trunk to locate the rear of the headlight, which is well hidden behind the side panel of the cargo area. Simply remove the panel by pulling it, and you will have access to the pins that secure the headlight. Of course, disconnect the connectors and remove the bulbs first. Now you can easily pull the headlight out from the back. Reverse the steps to reassemble the various components.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulbs of the BMW 3 Series
How to replace the rear headlight bulbs of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today we will explain how to replace the rear headlight bulb of a BMW 3 Series e91 model car on your own. We open the trunk of the car and then remov…
How to replace the front headlight bulb of the BMW E91
How to replace the front headlight bulb of the BMW E91
BMW Serie 3 (2005-2013 / E91, E90, E92) Today with the help of this short video tutorial we will explain how to replace the headlight bulb of the BMW 3 Series, model E91. This operation is …
Instructions for Removing the Rear Headlight
Instructions for Removing the Rear Headlight
BMW Serie 3 (2005-2013 / E91, E90, E92) Removing the rear headlight is very simple and does not require special precautions; open the trunk to access the cargo area and remove the inner tri…

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos