Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Rear Headlight

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

See other generations:
Video tutorial

Removing the rear headlight is very simple and does not require special precautions; open the trunk to access the cargo area and remove the inner trim cover located directly at the rear headlight's position; then disconnect the headlight power connector and unclip the bulb holder; finally, unscrew the mounting nuts of the headlight to complete its removal by pulling it out from its position.

You will then reverse the process to install the same headlight or a new one (perhaps with white lenses).


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Removing the Rear Headlight of a BMW 3 Series
Removing the Rear Headlight of a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) How do you remove the rear headlight of a BMW? Let's look at removing the rear headlight of a BMW 3 Series. Lift the trunk of the car and secure it. …
Instructions for Removing the Rear Headlight
Instructions for Removing the Rear Headlight
BMW Serie 3 (1998-2006 / E46) Removing the rear headlight is very simple, but you need to remove some elements inside the trunk to access the headlight mounting; open the trunk, r…
Rear Light Assembly Removal Instructions
Rear Light Assembly Removal Instructions
BMW Serie 3 (1998-2006 / E46) The rear light assembly consists of two parts: one fixed to the outer side of the body and the other attached to the hatch of the trunk. To remove th…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos