Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cabin filter of the BMW X3?

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Cabin air filter

In order to replace the cabin filter of the BMW X3, you need to open the hood so that you can access the components in the upper part of the engine compartment, just below the windshield: here, on the passenger side, you will be able to locate a grille that needs to be detached by removing it from the clips, to access the cabin filter below. The filter can now be removed from its housing, so that the new replacement piece can be inserted; after the replacement, you can cover everything again with the panel.

Posted on 10 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Cabin Air Filter on BMW X3
Replacing Cabin Air Filter on BMW X3
BMW X3 (2003-2010 / MK 1, E83) Let's go through the removal of the cabin air filter on a BMW X3. Lift the hood to access the cabin air filter: the filter is located in the plastic …
How to Replace the Cabin Air Filter on BMW X3 F25
How to Replace the Cabin Air Filter on BMW X3 F25
BMW X3 (2010-2017 / MK 2, F25) Access the cabin air filter on the BMW X3 F25 through the engine compartment, as the filter is located on the passenger side just below the windshiel…
How to replace the cabin air filter of the BMW X3
How to replace the cabin air filter of the BMW X3
BMW X3 (2017-2024 / MK 3, G01) If you own a BMW X3 and want to find out the necessary steps to complete the replacement of the cabin air filter, then all you have to do is pay atte…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos