Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time on a BMW 3 Series E46 version

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Clock

In this video we can see how to set the time on a BMW Series 3 E46 version car: it is a very simple operation that is done with the button/wheel located on the right side of the tachometer. The time is displayed on the small red LED display located between the speedometer and the tachometer. To change the time we will have to press the button/wheel, so that the displayed time disappears, and in its place a series of dots appear: then with the wheel function, we turn the time until the desired hour appears (we can set the time in both 12 and 24 hours), and then pressing the button we move on to the minutes where we will repeat the operation. By pressing, we confirm our choice.

Posted on 10 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to set the time on a BMW 3 Series E46 version
How to set the time on a BMW 3 Series E46 version
BMW Serie 3 (1998-2006 / E46) Let's see how to change the time on a BMW 3 Series E46 version: with the instrument panel on, press the button labeled "BC" located at the end of the…
How to adjust the clock of the BMW 3 Series E46 version
How to adjust the clock of the BMW 3 Series E46 version
BMW Serie 3 (1998-2006 / E46) In this video, we can see how to set the clock of the BMW 3 Series E46 version: we put the key in the ignition and turn it to the second position to …
How do you change the time on a BMW 3 Series E46 version car?
How do you change the time on a BMW 3 Series E46 version car?
BMW Serie 3 (1998-2006 / E46) In this video we see how to change the time on a BMW 3 Series E46 version, even though the system is valid for all BMW cars of this same period. We u…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos