Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulbs of the BMW X1

Model: BMW X1 F48 - Years 2015-2022
Part: Headlight bulb

Today we will discover the necessary instructions on how to disassemble and replace the headlights bulbs of the BMW X1. First of all, let's move to the side and start by removing the plastic cap found on the front wheel arch, then disconnect the electrical connector of the bulb; remove the old bulb and replace it with the new one, with the same fitting, as shown in the video. At this point, install the new bulb and check its operation, finally reassemble the plastic cap; finally, if necessary, adjust the height of the lights!

Posted on 28 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the tail light bulbs in the BMW X1?
How to replace the tail light bulbs in the BMW X1?
BMW X1 (2015-2022 / F48) Replacing the rear headlight bulbs in the BMW X1, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, make…
How to Replace the Rear Headlight Bulb on a BMW X1
How to Replace the Rear Headlight Bulb on a BMW X1
BMW X1 (2015-2022 / F48) To replace the rear headlight bulb on a BMW X1, lift the plastic cover next to the light assembly. To remove it, you will need to lift the rivets tha…
Replacing the Headlight Bulb on the BMW X1 E84
Replacing the Headlight Bulb on the BMW X1 E84
BMW X1 (2009-2015 / E84) In today's tutorial video, you will learn how to remove and replace the headlight bulb on the BMW X1 E84, first generation, by following these simple…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos