Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front turn signal bulbs in the BMW X1?

Model: BMW X1 E84 - Years 2009-2015
Part: Headlight bulb

In this tutorial, we can see how to replace the front turn signal bulbs in the BMW X1, a very simple and quick operation. First, let's go to the side we will be working on, then locate the access panel in the front inner area of the wheel arch and open it by unlocking the relevant clips. Next, grab the bulb holder, slightly rotate it counterclockwise, and pull it out of the headlight. At this point, all that remains is to disconnect the old bulb, insert the replacement while avoiding direct contact with it using bare hands, and reassemble everything by following the reverse procedure.

Posted on 10 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to restore the brake pad warning on a BMW X1 E84?
How to restore the brake pad warning on a BMW X1 E84?
BMW X1 (2009-2015 / E84) In this video we see how to reset the brake pad warning light on the BMW X1 E84: if we have replaced the pads and the reset sensor (which is disposab…
How to Replace the Rear Headlight Bulbs on the BMW X1
How to Replace the Rear Headlight Bulbs on the BMW X1
BMW X1 (2015-2022 / F48) Below are the instructions to remove and replace the rear headlight bulbs on the BMW X1. First, open the trunk hatch and start unscrewing the screws …
Replacing Front Headlight Bulb on BMW X1
Replacing Front Headlight Bulb on BMW X1
BMW X1 (2009-2015 / E84) Replace the damaged bulbs mounted in the front headlight on a BMW X1. Open the hood by pulling the hood release lever and secure it. Remove the headl…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos