Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the brake pad warning on a BMW X1 E84?

Model: BMW X1 E84 - Years 2009-2015
Part: Warning light – error code

In this video we see how to reset the brake pad warning light on the BMW X1 E84: if we have replaced the pads and the reset sensor (which is disposable, and there is one for each axle); it must always be replaced every time it activates the warning; it cannot be physically reset. Turn on the instrument panel; press and hold the "BC" button located on the left side of the turn signal lever for about 10 seconds, until the menu appears on the instrument panel: always with the same button we find the "vehicle info" and scroll until we reach "brake status" and select with "BC". A message like "reset" will appear. Press and hold the "BC" button for a few seconds until a visual confirmation appears. At this point, turn off the vehicle. Wait 30 seconds and turn on the instrument panel for verification.

Posted on 31 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Brake Light on BMW X1 E84
How to Reset the Brake Light on BMW X1 E84
BMW X1 (2009-2015 / E84) In this video, you will learn how to reset the brake light that turns on when the brakes are worn and need to be replaced on a BMW X1 E84 (first gene…
How to reset the brake pad service light on the BMW X1 E84
How to reset the brake pad service light on the BMW X1 E84
BMW X1 (2009-2015 / E84) In the following article, we will see how to reset the brake pad warning light on the BMW X1 E84. For this operation, no tools are needed, and it is …
How to reset the brake pad service in the BMW X1?
How to reset the brake pad service in the BMW X1?
BMW X1 (2009-2015 / E84) In this tutorial we can see how to reset the brake pad service in the BMW X1, an extremely simple and quick operation, to be carried out only once al…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos