Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Armrest of the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

This guide will show you how to remove and replace the armrest of the BMW 3 Series, following the instructions below. First, access the rear of the vehicle and start by removing the plastic cover found at the back, prying it off from the sides.

Then, use something thin and a pair of pliers to remove the armrest pin, as shown in the video. At this point, completely remove the armrest, repairing or replacing it with a new one if necessary; all that's left is to reassemble and secure everything by applying the reverse procedure!


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to Remove the Armrest of the BMW 3 Series
How to Remove the Armrest of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today, see the steps to remove and replace the armrest of the BMW 3 Series, following the instructions below. First, get inside the vehicle and start…
Replacing the Armrest of the BMW 3 Series
Replacing the Armrest of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) The following steps will show you how to disassemble and replace the armrest of the BMW 3 Series. First, get inside the vehicle and start removing th…
How to Remove the Armrest of the BMW 3 Series
How to Remove the Armrest of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) In this brief and simple guide, you will see the main steps to remove and replace the armrest of the BMW 3 Series. First, get inside the vehicle and …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos