Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs of the BMW X3

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Tail light bulb

Today's guide will show us how to disassemble and replace the rear headlight bulbs of the BMW X3, in simple and quick steps. First, let's move to the back and start by opening the rear hatch of the trunk; then remove the side plastic cover, unscrew the screws of the headlight to remove it, as shown in the video. At this point, it will be possible to access the bulbs, as well as the brake light, turn signal, and reverse light; replace them if necessary with new ones, with the same attachment, following the video tutorial until the end!

Posted on 31 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear headlight bulbs of the BMW X3
Replacement of the rear headlight bulbs of the BMW X3
BMW X3 (2010-2017 / F25, MK 2) Today's instructions will allow us to disassemble and replace the bulbs of the rear headlight of the BMW X3. First, we open the rear hatch of the tru…
How to replace the brake lights bulbs in the BMW X3?
How to replace the brake lights bulbs in the BMW X3?
BMW X3 (2003-2010 / MK 1, E83) In this tutorial we can see how to replace the stop bulbs in the BMW X1, an extremely simple and fast operation. First of all, make sure that the key…
How to replace the rear light bulb on the BMW X3?
How to replace the rear light bulb on the BMW X3?
BMW X3 (2010-2017 / F25, MK 2) In order to replace the rear light bulb of the BMW X3, you have to open the tailgate so that you can have access to the side part of the correspondin…

Other guides you may be interested in

How to Replace the Rear Wheel Bearing on Peugeot 407

How to remove a rear wheel bearing along with all associated parts on a Peugeot 407? Position your car on a column lift, loosen the bolts with a socket wrench and raise it to a comfortable height. Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the brake caliper to detach it from the bracket. Use a socket to loosen the caliper bolt. Now remove the caliper bracket and unscrew the bolts on the brake disc, pulling the disc towards you to slide it off the wheel hub. Completely remove the wheel hub from the car's arm and extract the worn bearing. Using a pressing tool, fit the new bearing. Before reassembling everything, clean all dirt and debris from the disassembled parts with brushes and lubricate the components. Refit the brake disc with all associated bolts.

Watch the video!


by ScegliAuto

More videos