Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Air filter

See other generations:
Video tutorial

To access the air filter, release the hood using the designated latch and lift it up. This will allow you to locate the filter as shown in the video. Disconnect the connector and remove the tie that secures the intake hose.

Next, remove the bolts and screws that hold the air duct in place. Take it out, and now you can also unscrew the screws that seal it. This will allow you to open it and extract the cylindrical air filter.

Install the new filter in the correct orientation and retrace the steps described for reassembly.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter in a 2012 BMW 3 Series
How to Replace the Air Filter in a 2012 BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Replacing the air filter in the engine compartment of your 2012 BMW 3 Series is very simple. All you need to do to complete this operation is read th…
How to know the fuse diagram of a BMW 3 Series
How to know the fuse diagram of a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) The fuse box of a BMW 3 Series car can be located inside the vehicle's cabin and contains fuses related to: windshield wiper motor, windshield washer…
How to Replace the Air Filter and Cabin Filter on BMW 3 Series E91 320d
How to Replace the Air Filter and Cabin Filter on BMW 3 Series E91 320d
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video, you can briefly see how to replace the air filter and cabin filter on BMW 3 Series E91 320d. The first step is to lift the hood and se…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos