Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tire pressure sensor on the BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Tire pressure warning light

Today we will discover the instructions that will allow us to reset the tire pressure warning light of the BMW 5 Series; before performing the reset, it is necessary that all four tires are at the correct pressure. First of all, we get into the car and go to the settings and vehicle info section, using the central knob; then we go to the tire pressure section, confirm and perform the reset of the TPMS sensor, as shown in the video. Finally, we verify that the warning light has been permanently reset on the instrument panel!

Posted on 12 August 2024 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 5 (2003-2010 / E61, E60) These simple and brief instructions will show us the process of resetting the tire pressure monitoring system (TPMS) light on the BMW 5 Series; befor…
BMW Serie 5 (2017-2024 / G30) The instructions below will allow you to perform a factory reset of the multimedia system and radio of the BMW 5 Series in simple steps. First, get i…
BMW Serie 5 (1995-2003 / E39) In this guide, find the main instructions to reset the engine control unit of the BMW 5 Series. First, get in the vehicle and press and hold the acce…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos