Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Service Engine Soon Light in the BMW 5 Series

Model: BMW Serie 5 E60, E61 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Instrument cluster

See other generations:
Video tutorial

To remove the "Service Engine Soon" light in the BMW 5 Series, follow these steps: Turn on the car and wait for the "Service Engine Soon" light to illuminate on the dashboard. Purchase an OBD-II diagnostic code reader, which can be connected to the car's diagnostic port.

This port is usually located under the dashboard on the driver's side. Connect the OBD-II diagnostic code reader to the car's diagnostic port.

Turn on the code reader and follow the instructions to scan for error codes in the BMW 5 Series system. Once you have obtained the error codes, use the code reader to clear the stored codes.

Disconnect the code reader from the car's diagnostic port. Restart the car and check if the "Service Engine Soon" light has turned off.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (2017-2024 / G30) To reset the Service light on a BMW 5 Series, press and hold the brake pedal, then turn the ignition on three times in succession. At this point, the…
BMW Serie 5 (1995-2003 / E39) Before starting, sit in the driver's seat of your BMW 5 Series. Begin by pressing and holding the button located near the fuel gauge. Meanwhile, acti…
BMW Serie 5 (2003-2010 / E60, E61) To completely reset the Service light on a BMW 5 Series, insert the ignition key into the ignition switch: this will allow you to turn it to the on p…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos