Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Buick
    3. :
  3. Enclave
    4. : Instrument cluster

Buick Enclave - Instrument cluster

Buick Enclave (2008-2017 / MK 1)
To reset the oil light on the 2017 Buick Enclave, follow these steps:
In the following mini guide, we will discover how to reset the oil light on the dashboard of your first-generation Buick Enclave (2017 model year). First, you …read all…
Posted on 27 October 2023 by ScegliAuto
Buick Enclave (2018-2024 / MK 2)
How to reset the oil light on 2019 Buick Enclave
If you have just changed the engine oil in your Buick Enclave and the related warning light still comes on, you must necessarily carry out the following manual …read all…
Posted on 28 April 2023 by ScegliAuto
Buick Enclave (2008-2017 / MK 1)
How to reset the oil light on Buick Enclave
In this new mini guide of ours dedicated to your Buick Enclave Mk1 (year 2008-2017) we are going to find out how to manually reset the engine oil warning light …read all…
Posted on 13 December 2022 by ScegliAuto
Car stereo (1) Battery (5) Key (2) -board computer (1) Checks and maintenance (1) Tail light (1) Air filter (1) Cabin air filter (1) Light bulb (1) Headlight bulb (2) Front bumper (1) Brake pads (1) Instrument cluster (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos