Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Buick
    3. :
  3. Encore Gx
    4. : Checks and maintenance

Buick Encore Gx - Checks and maintenance

Buick Encore Gx (2020-2024 / MK 2)
How to use cruise control on Buick Encore GX
Let's see in this short and simple guide the necessary steps that will allow us to use the cruise control of the Buick Encore GX. First of all, we get on board …read all…
Posted on 1 May 2023 by ScegliAuto
Buick Encore Gx (2020-2024 / MK 2)
How do I install and remove apps on the Buick Encore Gx?
To install or remove new apps we must first turn on the car stereo. Using the touchscreen display let's tap (ie click) on the "Apps" icon. This will open a …read all…
Posted on 8 October 2022 by ScegliAuto
Buick Encore Gx (2020-2024 / MK 2)
How to adjust the seat position in the Buick Encore Gx?
In the Buick Encore we can set different parameters for the position of the driver's seat and, moreover, we can memorize two different positions. On the left …read all…
Posted on 4 August 2022 by ScegliAuto
Buick Encore Gx (2020-2024 / MK 2)
How do i remove the rack from the Buick Encore Gx?
In order to remove the Buick Encore Gx rack you have to go and lift the car with a bridge or jack, so that you can have access to the components in the lower …read all…
Posted on 16 May 2024 by ScegliAuto
Key (1) Checks and maintenance (4) Air filter (2) Cabin air filter (1) Headlight bulb (1) Interior lights ceiling light bulb (1) Engine oil (3) Door panel (1) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos