Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Buick
    3. :
  3. Encore Gx
    4. : Door panel

Buick Encore Gx - Door panel

Buick Encore Gx (2020-2024 / MK 2)
How do I replace the door panel of the Buick Encore GX?
In order to replace the Buick Encore GX door panel, you need to unscrew the screws securing the panel to the inside of the door. These will be found in the …read all…
Posted on 22 July 2022 by ScegliAuto
Key (1) Checks and maintenance (4) Air filter (2) Cabin air filter (1) Headlight bulb (1) Interior lights ceiling light bulb (1) Engine oil (3) Door panel (1) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos