Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Buick
    3. :
  3. Encore Gx
    4. : Engine oil

Buick Encore Gx - Engine oil

Buick Encore Gx (2020-2024 / MK 2)
How to replace engine oil on Buick Encore Gx
If we want to replace the engine oil and the filter on this car, we can do it ourselves by following the instructions below and taking a look at the video. …read all…
Posted on 13 April 2023 by ScegliAuto
Buick Encore Gx (2020-2024 / MK 2)
How do i change the engine oil of the Buick Encore GX?
In order to change the engine oil of the Buick Encora GX you have to go and open the hood so that you have access to the components inside the engine …read all…
Posted on 17 May 2024 by ScegliAuto
Buick Encore Gx (2020-2024 / MK 2)
How to replace Buick Encore Gx 1.3L engine oil and oil filter
Today we will see how to carry out the routine maintenance service of the Buick Encore Gx oil change, replacing the engine oil and oil filter. First we open …read all…
Posted on 25 April 2024 by ScegliAuto
Key (1) Checks and maintenance (4) Air filter (2) Cabin air filter (1) Headlight bulb (1) Interior lights ceiling light bulb (1) Engine oil (3) Door panel (1) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos