Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Buick Encore - Key

Buick Encore (2020-2024 / MK 2)
How to replace the battery of the 2022 Buick Encore key.
Replacing the battery inside the key of your 2022 Buick Encore is really simple, and to complete the operation correctly, you need to follow these steps. First …read all…
Posted on 13 December 2023 by ScegliAuto
Buick Encore (2013-2022 / MK 1)
How to replace the battery in the Buick Encore key.
If the battery inside the key of your Buick Encore is completely dead and you are wondering how to replace it, then all you have to do is read the following …read all…
Posted on 27 May 2023 by ScegliAuto
Buick Encore (2020-2024 / MK 2)
How to program a key for the Buick Encore?
In this video we can see how to program a new key for the Buick Encore car. The procedure does not require professional equipment or software and does not …read all…
Posted on 6 June 2023 by ScegliAuto
Buick Encore (2020-2024 / MK 2)
How to program Buick Encore remote
In this video we will see how to program the Buick Encore remote control. It could sometimes happen that we lose our key or if we have a new key available, it …read all…
Posted on 29 November 2022 by ScegliAuto
Buick Encore (2020-2024 / MK 2)
How to replace the Buick Encore key battery
If we need to replace the remote control key battery of this car, we will find information and directions on how to behave in this description. First of all it …read all…
Posted on 4 June 2022 by ScegliAuto
Battery (1) Key (5) Checks and maintenance (1) Rear bench seat (1) Cabin air filter (4) Headlight bulb (1) Rear bumper (1) Brake pads (1) Instrument cluster (4)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos