Do it yourself
| ||||
|
Buick Lacrosse - Video tutorial
Model: Buick Lacrosse
MK 2
- Years 2010-2016 In this video tutorial we will see the steps on how to disassemble and replace the Buick LaCrosse headlight, following the instructions below. First of all we open the bonnet of our car and we begin to remove the plastic bulkhead that we find above the front bumper, removing all the clips; then we unscrew the screws located under the bumper and on both sides of the front wheel arches, gently releasing the bumper on the sides, as shown in the video. At this point we use a torx screwdriver to unscrew the screws of the headlight, disconnecting the connector to remove it!
Posted on 24 July 2022 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.049
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |