Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Turn Signal Bulb in the Side Mirror of a Buick Envision

Model: Buick Envision MK 2 - Years 2016-2023
Part: Side marker bulb

Let's see in this guide how to remove and replace the turn signal bulb in the side mirror of a Buick Envision by following these simple steps. First, remove the glass of the side mirror using a thin lever; then disconnect the connector found at the back, as shown in the video. At this point, unscrew the screws of the mirror cap to detach it, then remove the side turn signal light; replace it with a new one and reassemble everything by applying the reverse procedure!

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box of the Buick Envision 2
Where to Find the Fuse Box of the Buick Envision 2
Buick Envision (2016-2023 / MK 2) If you want to find the fuse box of your second-generation Buick Envision in seconds, just read the following guide and follow the steps. Start by op…
How to Replace the Battery in a Buick Envision?
How to Replace the Battery in a Buick Envision?
Buick Envision (2016-2023 / MK 2) To replace the battery in a Buick Envision, open the hood to access the components in the lower engine compartment. Here, on the right side near the …
How to Change the Engine Oil in a Buick Envision?
How to Change the Engine Oil in a Buick Envision?
Buick Envision (2016-2023 / MK 2) To change the engine oil in a Buick Envision, access the underside of the engine compartment where you will find the oil drain plug. Once located, op…

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos