Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Cadillac ATS - Bodywork

Cadillac ATS (2013-2019 / MK 1)
How to replace the hood of a 2013 Cadillac Ats.
In this video, we show you how to replace the hood of a 2013 Cadillac Ats. To begin, make sure you order the correct part for the specific model of the car. In …read all…
Posted on 15 May 2023 by ScegliAuto
Cadillac ATS (2013-2019 / MK 1)
How to Put the Mesh Grill on Cadillac Ats
How to Install a Beautiful Mesh Grill on Cadillac Ats. It is an accessory that can be purchased for just under 320.00 euros on AliExpress, and is available in …read all…
Posted on 1 June 2023 by ScegliAuto
Car stereo (1) Battery (3) Gearbox (1) Spark plugs (1) Bodywork (2) Key (5) Checks and maintenance (2) Cabin air filter (2) Grille (1) Headlight bulb (1) Engine oil (1) Instrument cluster (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos