Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. ATS
    4. : How to Put the Mesh Grill on Cadillac Ats

Cadillac ATS - Video tutorial

Model: Cadillac ATS MK 1 - Years 2013-2019
Part: Bodywork
Operation: How to Put the Mesh Grill on Cadillac Ats

How to Install a Beautiful Mesh Grill on Cadillac Ats. It is an accessory that can be purchased for just under 320.00 euros on AliExpress, and is available in both black and chrome. However our youtuber teaches us to make it completely by ourselves, starting from the chromed frame, which is painted in candle, from the grid support, from which the standard one is removed, and from the black mesh, which is shaped according to the size of the support. The black grille can be found - for example - on eBay dim. 100x33 at 15.99. Gloss black paint costs 13.89 in the most expensive version. Using the hooks, you will connect the grille support to the already painted frame. It's time to place the grille, which you will have preformed in the shape of the Cadillac grille. Temporarily secure it with some clamps, not without having first protected the black paint with which you painted the frame. It's time to use a powerful two-component glue, which can fix the net to its support. Pour it and sprinkle it well, and leave it time to dry well. You can now remove the clamps. All that remains is to place the Cadillac logo, also completely black, helping you to position it with a measuring tape and body shop tape. Here too, help yourself with the two-component glue. You can now push the grid back into place with truly remarkable effect.


Posted on 1 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos