Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Cadillac ATS - Key

Cadillac ATS (2013-2019 / MK 1)
How to replace the remote control battery of Cadillac ATS?
In this tutorial we can see how to replace the battery of the Cadillac ATS remote control. For this simple and quick operation, we will need a spare CR2032 …read all…
Posted on 26 May 2023 by ScegliAuto
Cadillac ATS (2013-2019 / MK 1)
How to replace the key battery of the Cadillac ATS
To be able to replace the button battery inside the key of your Cadillac Ats (2013-2019) it really takes a few seconds. Let's find out how. First, pull the …read all…
Posted on 26 August 2022 by ScegliAuto
Cadillac ATS (2013-2019 / MK 1)
How to replace the key battery of the Cadillac ATS
If the smart key of your Cadillac ATS no longer works and you want to replace the battery inside it, just put into practice the steps described in our new mini …read all…
Posted on 23 July 2022 by ScegliAuto
Cadillac ATS (2013-2019 / MK 1)
How to replace the remote control battery of Cadillac ATS?
In this tutorial we can see how to replace the Cadillac ATS remote control battery, a very simple and low-cost operation. To do this, let's get a small …read all…
Posted on 21 November 2022 by ScegliAuto
Cadillac ATS (2013-2019 / MK 1)
How to replace the remote control battery on Cadillac ATS
To replace the remote control battery on Cadillac ATS, the first thing to do will be to prepare the necessary material: a remote control battery, model: "CR …read all…
Posted on 31 May 2022 by ScegliAuto
Car stereo (1) Battery (3) Gearbox (1) Spark plugs (1) Bodywork (2) Key (5) Checks and maintenance (2) Cabin air filter (2) Grille (1) Headlight bulb (1) Engine oil (1) Instrument cluster (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos