Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Cadillac
  4. :
  5. ATS
  6. : How to replace the key fob battery in a Cadillac ATS

Cadillac ATS - Video tutorial

Model: Cadillac ATS MK 1 - Years 2013-2019
Operation: How to replace the key fob battery in a Cadillac ATS

In this tutorial we will see what are the steps to perform in order to replace the remote control battery of the key of a Cadillac ATS car. Before starting, make sure you have the necessary material with you, i.e. a flat-head screwdriver and a 3V CR 2032 flat-type battery. Take the remote control and press the small button at the upper end of the body, this will allow you to remove the key inside. At this point, insert the tip of the screwdriver into the empty recess and lever so that the remote control opens; proceed to extract the exhausted battery and replace it. Finally, close the body and reinsert the key inside.


Posted on 12 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos