Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Chevrolet Malibu
    4. : Instrument cluster

Chevrolet Malibu - Instrument cluster

Chevrolet Malibu (2016-2023 / MK 9)
To reset the oil light on the 2020 Chevrolet Malibu.
To manually reset the engine oil light on your 2020 Chevrolet Malibu, simply follow the following procedure. First, you need to get into the driver's seat and …read all…
Posted on 5 October 2023 by ScegliAuto
Chevrolet Malibu (2016-2023 / MK 9)
How to reset the oil light on a Chevrolet Malibu.
To manually reset the engine oil light on your Chevrolet Malibu (latest model), you just need to follow these steps. First, go inside the car and turn on the …read all…
Posted on 30 May 2023 by ScegliAuto
Chevrolet Malibu (2016-2023 / MK 9)
How to reset the maintenance light on the 2017 Chevrolet Malibu
In the following mini guide dedicated to all owners of a Chevrolet Malibu we will find out how to perform the manual reset of the maintenance warning light …read all…
Posted on 17 July 2022 by ScegliAuto
Car stereo (1) Key (6) -board computer (1) Checks and maintenance (1) Air filter (2) Cabin air filter (4) Petrol filter (1) Engine oil (1) Instrument cluster (3) Fuse box (3) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos