Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Chevrolet Onix - Key

Key Chevrolet Onix (2020-2027 / mk 2)

Chevrolet Onix (2013-2022 / MK 1)
How do you reset the code 35 of the Chevrolet Onix?
When the code 35 appears on the instrument panel of the Chevrolet Onix, it means that there is a problem related to the operation of the remote control, as the …Read all…
Posted on 26 April 2025 by ScegliAuto
Chevrolet Onix (2020-2026 / MK 2)
How to Repair a Non-Functioning Spring Key on the Chevrolet Onix
As seen in the video, sometimes the internal spring that retracts the key into the black plastic housing may fail, leaving the key hanging. In these cases, use …Read all…
Posted on 13 August 2026 by ScegliAuto

Key Chevrolet Onix (2013-2022 / mk 1)

Chevrolet Onix (2013-2022 / MK 1)
How do you reset the code 35 of the Chevrolet Onix?
When the code 35 appears on the instrument panel of the Chevrolet Onix, it means that there is a problem related to the operation of the remote control, as the …Read all…
Posted on 26 April 2025 by ScegliAuto
Chevrolet Onix (2020-2026 / MK 2)
How to Repair a Non-Functioning Spring Key on the Chevrolet Onix
As seen in the video, sometimes the internal spring that retracts the key into the black plastic housing may fail, leaving the key hanging. In these cases, use …Read all…
Posted on 13 August 2026 by ScegliAuto
Car stereo (2) Body (3) Key (2) Tail light (1) Air filter (1) Cabin air filter (2) Oil filter (1) Headlight bulb (2) Handle (1) Brake pads (1) Warning light – error code (2) Service warning light (3) Manufacturer emblem (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos