Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the code 35 of the Chevrolet Onix?

Model: Chevrolet Onix MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Key

See other generations:
Video tutorial

When the code 35 appears on the instrument panel of the Chevrolet Onix, it means that there is a problem related to the operation of the remote control, as the battery inside it is low: to solve the problem, it will be necessary to replace it with a new one. To do this, you can press the button at the top of the device, so that the key fob lifts up and you can pry it out of its slot: the panel can be removed from its slot to remove the battery so that it can be replaced with a new spare part.


Posted on 26 April 2025 by ScegliAuto


Related tutorials

What Does the "Code 82" Message Mean in the Chevrolet Onix and How to Remove It?
What Does the "Code 82" Message Mean in the Chevrolet Onix and How to Remove It?
Chevrolet Onix (2013-2022 / MK 1) If the "Code 82" message appears on the dashboard of your Chevrolet Onix, it means it's time for a service as the interval has been exceeded. To do t…
What Does Code 82 Mean on the Chevrolet Onix?
What Does Code 82 Mean on the Chevrolet Onix?
Chevrolet Onix (2020-2026 / MK 2) Code 82 on a 2021 Chevrolet Onix indicates that it's time to replace the engine oil in the reservoir. After replacing the engine oil, you need to res…
How to Install Door Sills on a Chevrolet Onix
How to Install Door Sills on a Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) Let's see how to install door sills on the front doors of a Chevrolet Onix. It's actually very simple. First, clean and degrease the area of the body…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos