Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What does code 82 indicate in the Chevrolet Onix?

Model: Chevrolet Onix MK 2 - Years 2020-2026
Part: Warning light – error code

Code 82 on a 2021 Chevrolet Onix vehicle indicates that it is necessary to replace the engine oil in the tank. After replacing the engine oil, it is necessary to reset the oil light and the "error 82" code. To perform the reset, we need to turn on the instrument panel and immediately press the accelerator pedal three times in a row. To complete the operation, we will need to turn off and turn on the instrument panel. If the code does not seem to turn off, it may be necessary to replace the sensor related to the amount of engine oil in the tank.

Posted on 10 July 2024 by ScegliAuto

Video tutorial

Related tutorials

What does the message "Code 82" indicate in the Chevrolet Onix and how can it be removed?
What does the message "Code 82" indicate in the Chevrolet Onix and how can it be removed?
Chevrolet Onix (2013-2022 / MK 1) If the message "Code 82" appears in the instrument panel of our Chevrolet Onix, it means that it is time to perform the maintenance as the interval h…
How to Refine Your Chevrolet Onix with Branded Accessories
How to Refine Your Chevrolet Onix with Branded Accessories
Chevrolet Onix (2020-2026 / MK 2) A simple way to decorate your Chevrolet Onix. Metal door sills for all four doors, all featuring the Chevrolet Onix logo. They are also very useful b…
How to remove the stock radio of the Chevrolet Onix
How to remove the stock radio of the Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) Today's main instructions will show us how to disassemble and replace the stock radio of the Chevrolet Onix, in simple steps. First, we get on board …

Other guides you may be interested in

    Frequently Asked Questions

    • Chevrolet Onix 2020-2027 - What does the message "Code 18" indicate in the Chevrolet Onix? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos