Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Onix
    4. : How to install door sills on a Chevrolet Onix.

Chevrolet Onix - Video tutorial

Model: Chevrolet Onix MK 2 - Years 2020-2024
Part: Bodywork
Operation: How to install door sills on a Chevrolet Onix.

Let's see how to install door sill guards on the front doors of the Chevrolet Onix. It's actually very simple. You need to clean and degrease the part of the body where the door sill guard will be mounted very carefully, and then simply stick the black rubber adhesive to the body. As the YouTuber rightly points out, we need to align the outer edge of the door sill guard with the junction point of the inner rubber, in order to create continuity. Then we apply the Chevrolet logo and Onix lettering adhesive to the black rubber. We just need to proceed on the other side to complete the job. We found only Chevrolet door sill guards on Ali Express for 23.41 euros + shipping costs, but we couldn't find the customized Onix ones.


Posted on 26 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos