Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Factory Radio from the Chevrolet Onix

Model: Chevrolet Onix MK 2 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Car stereo

See other generations:
Video tutorial

Today's main instructions will show you how to disassemble and replace the factory radio of the Chevrolet Onix in simple steps. First, get inside the cabin and start removing the cover above the radio; then unscrew the fastening screws located underneath, finally disconnecting the electrical connectors to completely remove the radio, as shown in the video.

At this point, replace the radio with the new one if necessary, making the connection; check its operation before securing it to the dashboard of the vehicle.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in the Chevrolet Onix
How to Replace the Radio in the Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) In today's video tutorial, you will see how to remove and replace the factory radio in the Chevrolet Onix in simple and quick steps. First, get in th…
How to Install Door Sills on a Chevrolet Onix
How to Install Door Sills on a Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) Let's see how to install door sills on the front doors of a Chevrolet Onix. It's actually very simple. First, clean and degrease the area of the body…
How to Replace the Headlight Bulb on a Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) Today, follow the steps to remove and replace the low beam bulb of the front headlight on the Chevrolet Onix. First, open the hood of your car and st…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos